Payment & Shipping Terms:
|Application:||Textile Printing And Dyeing||PH:||6-7|
textile dyeing chemicals
Multi Functional Resin Textile Finishing Chemicals Sunlight Fastness Improver
We are specialized in manufacturing textile auxiliary agent for nearly 30 years.
Our main products:
1. Pretreatment agent series
souring agent, penetrating agent, chelating agent, oil remover agent,Enzyme and so on
2. Dyeing and printing agent series
fixing agent, promoter, defoamer, detergent, anti-migrant, levelling agent,binder, thickener,soaping agent and so on
3. Finishing agent series
softener, water repellent agent, resin, stiffener,smoothing,softening,fluffing,polishing
4. Functional additives
durable flame retardant ,sunlight fastness improver,anti-pilling,three-prevention waterproof,ultraviolet-proof
l Endow the fiber with excellent waterproof and oil proof properties
l Make the fiber alcohol resistant
l Nonflammable water based emulsion
l Applied by spray, foam, coating, wet roller, padding, dip-coating and other ways
l Stability while using with other additives together
l Don’t need to add the crosslinking agent to the system
l Comparablewith Dakin products
l Non-ionic Perfluorinated polymer emulsion
l Appearance: Milky emulsion or faint yellow emulsion
l pH: 6-7
l Solid content: ~30%
l Ionicity: weak cation
l Solubility in water: soluble easily in water
The product doesn’t contain alkyl phenol polyoxyethylene ether compounds (APEO). The perfluorinated octyl sulfonamide (PFOS), heavy metals and perfluoro caprylic acid (PFOA) content are all below 1 PPM. The product meets the export standards.
Package, storage and transportation
l Available in200 kg/barrel or 25 kg/barrel
l Storage period: 12 months in closed containers, shady and dry place
l According to non-dangerous goods transport
1. The preparation of textile fabric
l In order to get the optimal effect, you must remove the additives on the surface of fabric, such as wetting agent, dyeing auxiliary, softening agent and so on.
l Pieces of fabric fiber rate must be less than 1.5% and recommends testing by AATCC97. In addition, ensure that the fabric in weak acid, alkali content less than 0.05% and recommend testing by AATCC 144.
l Avoid reducing effect, raising and sand grinding should be carried out before finishing; Some mechanical finishing, such as calendering, electro-optic and brush can be conducted between drying and baking.
2. The preparation of solution
l Firstly, add the quantitative PF-208 into the clean container, and then the quantitative water is added into. Finally, stir the solution at a low speed until uniformity.
l Preferably, have a test before mass production. For new fabric, using PF-208to preparation the duplicate worksolution,the one is not to adjust pH value, the other is adjustedthe pH value to 4 by adding 0.1% acetic acid. According to the sametest conditions to test them, find the optimal pH value.
l While using it with crosslinking agent, penetrating agent, crease resistant resin and other additives together, all of theseadditives should be separately diluted and avoid additives raw solution mixing.
3. The recommended dosage
l Polyester fabric:20~60 g/L
l Nylon fabric:20~ 60g/L
l Polyester or cotton fabric 40~80 g
4. The application method
l pH value (according to the test result)
l Predrying temperature: 110~130℃
l Baking: Recommended 170℃ (fabric surface) by the stenter setting machine and the baking time is 60 seconds
l While using it with crosslinking agent, penetrating agent, crease resistant resin and other additives together, please must check its intermiscibility with other additives by test.
l Agitate the solution while preparing the PF-208 solution.
l The product can increase the color degree and please check the color after processing.
l Baking should be fully to ensure the effect.
l Please run out of the prepared solution within 12 hours.
l Due to the resin residue easily adhesion and accumulation on the roller, roller drying is not good method.
Jiangsu World Chemical Co.,Ltd. is an enterprise of science and technology type with high starting point,specializing in the production of environmental dyes. The company is located in the Economic development zone,Yixing City,Jiangsu Province.There is a streamlined team with strong abilities of technology research and development,production control,application testing.
The Technology Applications and R&D center of the company has leading quality testing equipment from home and abroad. Our company have passed ISO9001 international quality mangement system certification and ISO14001 environmental management system certification.
Our Team and service
We take great pride in our work and in the wide variety of products that we offer. We are experienced in serving the worldwide market. Please be aware that our production lead times depend on specific items and item quantities. Our success has been based on our understanding of the demands and nature of products and marketing deadlines. That's why we always ensure that every order is delivered on time.
We accept CUSTOMIZATION as different customers in different markets always have different needs and wants. MOQ is varied based on the specific item. From the product itself, the package to the marketing catelogue we can provide according to your demands.
We know well of what the customers are feeling when waiting for the order after deposit confirmed. Here World Chemical Co., Ltd. provides Live Broadcast Service to inform you of every step in the production. There will be specially-assigned person mailing you situations for raw materials buying, production starting, finished goods packaging, booking cargo space and ect.
We have cooperated with China Export and Credit Insurance Corporation (SINOSURE). This new financing program can provide you O/A payment of 30-60 days of Maximum USD 100000.
We have a professional team of talented application engineers to serve oversea customers. If you have any problem in products application, they can come to your door to slove the pro
|Q1. How can I get the samples for testing?|
|Q2. How can I get the price of needed products?|
|Q3. I don’t know whether your product can be available, how can I order this from you?|
It’s the best way if you can send us a sample, so we can according to your samples give you a counter sample for checking the quality. Also we will quote a price for you to check the cost. After confirming all of this, you can contact our sales for an order.
|Q4. I am a small wholesaler, do you accept small order?|
It’s no problem if you are a small wholesale, we would like to grow up with you together.
|Q5. How to use the product?|
We are pleased to be requested the application methods from you and we will use words and videos to tell how to use. We also have application engineers can provide onsite service for you customers.
|Q6. We want to be your agent of our area, how to apply for this?|
Please send your idea and your profile to Gloria@ wldchem.com
|Q7. Can you make OEM service of your products?|
Yes. We can accept OEM service. Also we have provided OEM service to lots of big and famous companies in the order.
|Q8. How can you ensure the quality to us?|
Contact Person: Allison